By Township Canada
Screening BC Orphan and Abandoned Well Sites by NTS Grid Reference
Find a BC orphan or abandoned well site by its NTS grid location, read its BCER status, and build an Energy Report PDF for a remediation or lease file.
A reclamation file for a well site in northeast British Columbia usually starts with a location that looks nothing like an Alberta LSD. The well is written as 200/B-039-H/094-B-08/00, and the site sits somewhere in a quarter unit of an NTS map sheet. Before anyone books a field crew or reviews a surface lease, someone has to turn that string into a place on the ground and check what else is there.
This post walks through that screen in Township Canada: finding a BC well site by its NTS reference, reading the status the BC Energy Regulator (BCER) publishes for it, and exporting a report for the file. It also covers one limit you should know before you start: Township Canada does not carry an orphan flag for BC wells.
Why BC well locations use the NTS grid
Most of British Columbia was never surveyed under the Dominion Land Survey. The exception is the Peace River Block, where wells carry ordinary DLS locations west of the 6th Meridian. Everywhere else, BC wells are located on the National Topographic System.
An NTS well location reads from the smallest unit to the largest. In B-039-H/094-B-08, B is the quarter unit, 039 is the unit, and H is the block, all inside map sheet 094-B-08. The full BC UWI wraps that reference with a location exception code in front (200) and an event sequence at the end (00). If you are new to the hierarchy, the NTS system explainer covers map areas, sheets, blocks, and units in detail.
Finding the site by NTS reference
Paste either form into the Township Canada search bar. The full UWI 200/B-039-H/094-B-08/00 works, and so does the bare NTS reference B-039-H/094-B-08. Search reads the UWI, strips the prefix and event sequence, and takes you to the quarter unit. Peace River Block wells resolve the same way through their DLS location.
This matters for orphan and abandoned site work because the source list rarely uses a single format. A BCER export, a consultant's spreadsheet, and a landowner's letter can each describe the same site differently. Converting each one to the same quarter unit on the map is the fastest way to confirm they point at the same place.
Reading well status on the BC Wells layer
Turn on the Wells layer from the Energy category in the layers panel. It is a free base layer, and it covers Alberta, Saskatchewan, British Columbia, and Manitoba in one toggle. Set the Province filter to BC, then use the Status filter to show only Abandoned or Suspended wells. At closer zoom, each well's symbol shows its product colour and status shape, so an abandoned gas well reads differently from an active oil well.
BC status comes from the BCER well activity code on each well record. That gives you abandoned and suspended states, but not an orphan designation. The amber orphan triangle on the Wells layer comes from Alberta's Orphan Well Association inventory, and the BCER spatial layer publishes no equivalent field. As a result, a BC well can be a designated orphan site and still show as abandoned or suspended in Township Canada.
For remediation work, treat the BCER's own orphan site records as the source of the orphan designation. Use Township Canada to place each designated site on the grid, confirm its status, and see what surrounds it.
What the Energy tab shows for a BC parcel
With the Energy add-on, click the site and open the parcel report. Outside the Peace River Block, the report runs on the ParcelMap BC parcel under the point rather than on a DLS quarter, so it needs a parcel with a PID. Where a site sits on untitled Crown land with no PID, the Wells layer still shows the well and its status, but there is no parcel report to open. For a titled parcel, the Energy tab lists:
- Wells on the parcel, with their BCER status and abandoned and suspended counts.
- Pipelines crossing the parcel. The BCER publishes line type only, so BC rows have no substance, diameter, pressure, or H2S values.
- Facilities on the parcel.
- Crown PNG and mineral tenure intersecting it. BC PNG agreements publish no holder name, so the report shows the disposition number instead.
- Production over the trailing 12 months from BCER per-well volumes. The window ends at the latest month the BCER has published, which can be several months behind.
- Field areas the parcel falls in.
For a surface lease review, the pipeline and tenure rows answer the questions that follow an abandoned well: is there still a line on the parcel, and does anyone hold Crown rights under it? The Energy add-on guide explains each card, and the data sources index lists where each dataset comes from and how often it refreshes.
Exporting the Energy Report PDF for the file
From the Energy tab, select the PDF button in the sidebar footer to build the Energy Report PDF. For a BC parcel it carries the parcel identity, its NTS reference, the well, pipeline, facility, tenure, and production sections, and a method page with the sources and data dates behind them. That makes it a practical attachment for a remediation work package or a surface lease file, because it shows what you screened against and when.
One report is one parcel in one month. Opening the same parcel again, or building its PDF, does not count a second time. The Energy add-on includes 100 parcel reports a month and costs $180 a month or $1,800 a year on top of a Pro or Business plan.
Screening across the provincial border
Many operators and consultants who work in northeast BC also work the Alberta side of the Montney and the Peace country. Because the Wells layer spans all four western provinces, you can screen BC sites by NTS reference and Alberta sites by LSD in the same view, without switching layers. The difference is in the status detail: Alberta wells carry the orphan flag, while BC wells stop at abandoned and suspended.
The oil and gas overview covers the rest of the Energy add-on for teams that run both sides of the border. Township Canada is a screening and location tool. For any regulatory filing, the BCER remains the authoritative source for well status and orphan site designation.